Lorem ipsum dolor amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus.


Follow Us:

Configuring an eGauge with a static IP address

Configuring an eGauge with a static IP address

You are here:
< Back

By default, the eGauge meter uses DHCP to obtain an IP address from the local network. However, in some instances this may not be allowed. In these cases the eGauge can be configured to use a static IP address on that network. The network administrator or IT person managing the network in question will need to provide some network details. Note that changing the Hostname field will cause the eGauge to lose its ability to connect to the eGauge proxy server – do not change this setting!

If in doubt, a static IP address is most likely not required. eGauge support can assist with setting a static IP address, but cannot guarantee that the values used in that address are correct for the network. Please refer to the document below for additional information and step by step instructions.